Research on measurement module of precision infrared radiometer
Keywords:
infrared radiometer, phase sensitive detectionAbstract
The infrared radiometer is generally used for the calibration of the infrared thermal imager testing equipment. A measurement module and method for infrared radiometer were introduced. A measurement scheme of sample and hold was designed, the sampling pulse was generated from the reference signal, and the sampling point was set at the 1/4 phase of each signal period, which could significantly improve the measurement ability of weak signals. For the black-body radiation signal at 35 ℃, the measured signal strength could be increased by 57.6% by comparing with the existing scheme. Under the condition that the background temperature of the infrared thermal imager testing equipment was 22 ℃, the measurement signal accuracy could be improved by more than 50% through the comparison test with the existing instruments. © 2022 Editorial office of Journal of Applied Optics. All rights reserved.
References
WANG Xuexin, YANG Hongru, WU Lipeng, Et al., Research on high precision MRTD testing and calibration technology[J], Journal of Applied Optics, 41, 5, pp. 1026-1031, (2020); HU Tieli, LI Xudong, FU Jianming, Et al., Double-blackbody unit for measuring parameters of infrared cameras[J], Journal of Applied Optics, 27, 3, pp. 246-249, (2006); CHEN Zhenxing, Research for infrared imaging system MRTD testing technology, (2011); HU Tieli, SHEN Yue, GUO Yu, Et al., Low noise infrared radiometer[J], Journal of Applied Optics, 34, 4, pp. 663-666, (2013); QIU Chao, ZHAI Siting, WU Kexuan, Et al., Research on low-temperature infrared radiation measurement technology under vacuum condition[J], Journal of Applied Optics, 41, 4, pp. 730-736, (2020); MAO Yunzhi, CHENG Xianhai, HUANG Chuanlu, Improve measurement precision of microwave radiometer by dynamic feedback equalize, Journal of Microwaves, pp. 646-649, (2014); HAN Tuanjun, Design of weak signal extraction circuit based on lock-in amplifier[J], China Sciencepaper, 13, 24, pp. 2804-2808, (2018); WANG Qi, JIANG Chuandong, DU Hailong, Weak signal detection system based on phase-locked amplification with low noise and high gain[J], Experimental Technology and Management, 35, 3, pp. 84-86, (2018); MAO Shengyuan, LUO Xiangdong, ZHOU Chuanhang, Digital lock-in amplifier detects weak modulation signal[J], Laser Journal, 35, 10, pp. 879-884, (2006); LIU Suying, Design of a lock-in amplifier for detecting weak photocurrent signals[J], Journal of Chuzhou University, 20, 2, pp. 41-45, (2018); GAO Jinzhan, Detection of weak signals, (2004); ZENG Qingyong, Detection of weak signals, (1994); YU Bing, WANG Baolong, LI Hongguang, Et al., Research on divergence angle measurement technique of terahertz sources[J], Journal of Applied Optics, 42, 3, pp. 499-503, (2021); XIONG Xianming, ZHANG Haishen, HAN Jiaguang, Et al., The design of phase locked amplifier circuit in Terahertz test system[J], Electrical Measurement & Instrumentation, 54, 7, pp. 89-93, (2017); SUN Zhibin, CHEN Jiagui, Advance of lock-in amplifier[J], Experimental Technology, 35, 10, pp. 879-884, (2006)
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Journal of Applied Optics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
The CC Attribution-NonCommercial 4.0 License allows sharing and adapting the work, provided the creator is credited and the work is not used commercially. Modifications must be indicated, and derivative works under the same license are allowed.
