Design of 50 mm~1 000 mm zoom optical system with high zoom ratio

Authors

  • Yuan L The 713th Research Institute of China Shipbuilding Industry Corporation, Zhengzhou, 450015, China
  • Demao, Y

Keywords:

High zoom ratio, Image quality, Mechanical compensation, Miniaturization

Abstract

In order to meet the requirements of the high image quality, high zoom ratio, long focus and miniaturization zoom optical system for the foreign object debris detection, a 50 mm~1 000 mm zoom optical system based on Zemax optical software was designed. The mechanical compensation zoom type was adopted to realize the zoom system, the extra-low dispersion lenses were adopted to reduce the chromatic aberration and secondary spectrum was introduced by the long focal length. Meanwhile, the merit function operands was used to simultaneously optimize the image quality and design the miniaturization system. The system contains 28 lenses and the total length is less than 400 mm by optimizing design. The on-axis modulation transfer function (MTF) is above 0.2 at 100 lp/mm, which means near the diffraction limit generally. The system field curvature is less than 0.1 mm and the distortion is less than 1%. The system can satisfy the change regulation of the mechanical compensation cam curve, and the curve is continuous and smooth. The analysis results show that the system can meet the practical application requirements of the foreign object debris detection around airport runway, furthermore, it's significant for the design of large zoom ratio zoom optical system. Copyright ©2020 Journal of Applied Optics. All rights reserved.

References

FOD precaution manual, pp. 1-5, (2009);

HU Jixian, Design of long focal length large-aperture optical zoom system, Journal of Applied Optics, 28, 5, pp. 54-62, (2007);

HU Jixian, HU Feng, Design of miniaturization for fog transmission zoom lens, Journal of Applied Optics, 30, 4, pp. 18-22, (2009);

YAO Qinghua, YAN Juncen, Design of zoom optical system with high zoom ratio, Journal of Applied Optics, 36, 5, pp. 15-20, (2015);

BAI Hubing, MIAO Li, Design of large aperture and long focal length zoom optical system, Journal of Applied Optics, 39, 5, pp. 58-63, (2018);

ZHANG Yimo, Applied optics, (2008); KIDGER M J., Intermediate optical design, (2004); WANG Kun, Optical design of day and night con-focal high-definition imaging system with large sensor and aperture, pp. 8-14, (2016);

GE Jingjing, LIN Zhaorong, ZHU Dakai, Design of mid-wave infrared continuous zoom system, Journal of Applied Optics, 34, 5, pp. 728-732, (2013); LI Yu, XIAO Gang, Study and design on FOD detection and surveillance system for airport runway, Laser and Infrared, 8, pp. 91-97, (2011);

CUI Enkun, ZHANG Bao, HONG Yongfeng, Design of initial structure of infrared zoom optical system, Journal of Applied Optics, 35, 4, pp. 586-591, (2014);

STONE T, GEORGE N., Hybrid diffractive-refractive lenses and achromats, Applied Optics, 27, 14, pp. 2960-2971, (1988);

MERCADO R I, RYZHIKOV L., Designs of apochromats and superachromatic objectives, 3482, pp. 321-331, (1998);

HONG Xinhua, CHEN Liwu, ZHENG Li, Et al., Apochromats by the method of hybrid diffractive-refractive, Laser Journal, 24, 6, pp. 25-26, (2003);

LIU Yingqi, Study on apochromatism of wide spectral optical system, pp. 15-26, (2009)

Published

30-06-2020

How to Cite

Yuan, L., & Demao, Y. (2020). Design of 50 mm~1 000 mm zoom optical system with high zoom ratio. Journal of Applied Optics, 41(1), 8–17. Retrieved from https://appliedopticsjournal.net/index.php/JAO/article/view/21

Issue

Section

Original Research Article

Similar Articles

1 2 3 4 5 > >> 

You may also start an advanced similarity search for this article.